Filter
Top Products
Installation Guide for Customer Self-Install: Westell ® 516, Macintosh Page 19
©2001 SBC Advanced Solutions, Inc. All rights reserved.
Installing the Kingston® Ethernet Adapter
• Follow steps B-1 through B-10 below for Desktop Macintosh installations.
• For Laptops
, skip to step B-11.
DESKTOP Systems
B-1 Click Quit in SBC Express and then turn off all peripheral devices. Remember to
leave the SBC Express CD in the CD-ROM drive.
B-2 Unplug the power cord for your computer from the electrical outlet.
B-3 Open the case of your computer (review your computer manufacturer’s Owner’s Manual
for specific instructions).
B-4 Touch the computer chassis (metal frame) before touching the Kingston® Ethernet
Adapter. This helps to protect the Kingston® Adapter from static electricity.
B-5 Locate an available PCI slot (usually white in color). You may use any available PCI
slot. Make sure you are looking downwards on the PCI slot. You may need to turn the
computer on its side to accomplish this (review your computer manufacturer’s Owner’s
Manual for specific instructions).
B-6 Remove the metal PCI slot cover from the unused PCI slot, and retain the screw.
PCI Slot
Remove PCI slot
cover
B-7 Carefully insert the Kingston® Ethernet Adapter into any empty PCI slot. Make sure the
card is completely seated by pressing firmly.