Filter
Top Products
SIMATIC S7 Ethernet
17
Equipment Configuration
Overview
To set up details about the communication process between the target machine and
the PLC, use the [Equipment Configuration] dialog box.
For an overview of the driver and equipment settings, see Equipment Configuration.
S7-200 Series
Screen Description
WARNING
UNINTENDED EQUIPMENT OPERATION
Read and understand the instructions in this section to ensure data is properly
transferred. If you do not follow these instructions, incorrect data could be written
to the PLC and the target machine.
Failure to follow these instructions can result in death, serious injury, or
equipment damage.
Note:
z For information on how to display the [Equipment Configuration] dialog box, see
the online help.
Area Description
IP Address Enter the PLC unit’s IP address.
Module Enter the module number to match the PLC configuration software.
Connection Enter the connection number to match the PLC configuration software.