Schneider Electric TSXETG100 Network Router User Manual


 
ConneXium Ethernet Gateway 63230-319-211A1
Diagnostics 2/2006
© 2006 Schneider Electric. All Rights Reserved.16
ENGLISH
Serial Port
Frames Sent A counter that increments each time a frame is
sent.
Frames Received A counter that increments each time a frame is
received.
CRC Errors A counter that increments each time a
message is received that has a CRC that does
not match what is calculated. Typically the
result of wiring issues.
Protocol Errors A counter that increments each time an ill-
formed message is received.
Timeouts A counter that increments each time a request
message is sent without receiving a
corresponding response message within the
allowed time. Timeouts are typically the result
of configuration errors or a non-responsive
device.
Inbound Read Messages
d
A counter that increments each time a read
request message is received.
Outbound Read Messages
c
A counter that increments each time a read
request message is sent.
Inbound Write Messages
d
A counter that increments each time a write
request message is received.
Outbound Write Messages
c
A counter that increments each time a write
request message is sent.
Gateway Information
Firmware Version The firmware version that is installed on the
ETG.
System Idle Time A percentage from 0% to 100% indicating the
average processor time that is not being used.
MAC Address The unique Ethernet hardware address of an
ETG.
Serial Number The serial number of the ETG.
Model Number The ETG model number (100).
Hardware Version ETG hardware version.
Manufacture Date Date the ETG was manufactured.
Statistic Description
c
Available when the serial port is in Master mode.
d
Available when the serial port is in Slave mode