Filter
Top Products
3
BEFORE USING PI-140 POWER INVERTER
It is important to know the continuous wattage of the device
you plan to use with the inverter. The PI-140 must be used
with devices drawing 140 watts or less. If the wattage is not
marked on the device, an estimate can be made by multiply-
ing the AC input current (Amps) by the AC voltage (110V).
Devices like TVs, fans or electric motors require additional
power to start (commonly known as the “starting or peak
power”). The PI-140 can supply a momentary surge in watt-
age; however even devices rated less than the maximum 140
watts can exceed the inverters surge capability and cause
an automatic overload shutdown.
Make sure the device you are using is compatible with a
modied sine wave inverter.
OPERATING INSTRUCTIONS
1. Push the PI-140 rmly into the 12V accessory outlet. The
LED indicator light should glow GREEN verifying the
inverter is receiving power. (If connecting in a vehicle,
remove the cigarette lighter from its outlet.)
2. Make sure that the device to be operated is turned
OFF.
3. Plug the device into the PI-140 AC outlet.
4. Turn the device on. If the LED Indicator briey blinks