Filter
Top Products
- 4 -
In the event of a power overload, the inverter is designed
to automatically shut down. This safety feature prevents
damaging the inverter while testing devices and equip-
ment within the 1500-watt range.
If a device will not operate properly when rst connected
to the inverter, turn the inverter rocker switch ON (I), OFF
(O), and ON (I) again in quick succession. If this proce-
dure is not successful, it is likely that the PI-1500 inverter
does not have the required capacity to operate the device
in question.
Important: Make sure you connect your inverter to a
12-volt power supply only. Connecting to another voltage
including any AC power source, will result in damage.
• Do not try extending or otherwise changing the 12-volt
power cord of your inverter.
• Install in negative ground applications only.
• Incorrect operation of your inverter may result in
damage and personal injury. Electrical current on a
110-volt circuit can be very dangerous.
Fastening the PI-1500 to a Flat Surface
For convenience, the PI-1500 can be fastened to a at
surface, horizontally or vertically. The area where the
inverter is to be fastened must be dry, well ventilated and
away from any combustible products or fumes.
1. Turn off the PI-1500.