Filter
Top Products
SEAGATE 600 SSD PRODUCT MANUAL, REV. B 25
67 Minimum PIO transfer cycle time without flow control (120ns) 0078
H
68 Minimum PIO transfer cycle time with IORDY flow control (120ns) 0078
H
69 Additional Features and Commands supported.
Trim Features supported, DMA commands supported
0100
H
70 Reserved 0000
H
71–74 Reserved for ATAPI 0000
H
75 Queue depth 001F
H
76 Serial ATA Capabilities Supported 870E
H
77 Reserved for Serial ATA 0006
H
78 Serial ATA features supported 0056
H
79 Serial ATA features enabled 0040
H
80 Major version number 01F0
H
81 Minor version number 0029
H
82 Commands and feature sets supported 746B
H
83 Commands and feature sets supported 7401
H
84 Commands and feature sets supported
4163
H
85 Commands and feature sets supported or enabled 7469
H
86 Commands and feature sets supported or enabled B401
H
87 Commands and feature sets supported or enabled 4163
H
88 Ultra DMA support and current mode (see note following this table) 407F
H
89 Security erase time 0004
H
90 Enhanced security erase time 0000
H
91 Current APM level value 0000H
92 Master password Identifier FFFE
H
93 Hardware reset result 0000
H
94 Reserved 0000
H
95–99 ATA-reserved 0000
H
100–103 Total Number of User Addressable Logical Blocks for 48-bit commands. These words
are required for drives that support the 48-bit addressing feature. Maximum value:
0000FFFFFFFFFFFFh
480GB model = 937,703,088
240GB model = 468,862,128
120GB model = 234,441,648
104 Reserved for Streaming Command Set 0000
H
105 Maximum number of 512-byte blocks of LBA Range Entries
(see 4.18.3.2) per DATA SET MANAGEMENT command
0001
H
106 Physical sector size / logical sector size 6003
H
107 Inter-seek delay for ISO 7779 standard acoustic testing 0000
H
108–111 World wide name XXXX
H
112–115 Reserved 0000
H
116 Reserved for TLC 0000
H
117–118 Logical sector size (DWord) 0000
H
119 Commands and feature sets supported 4014
H
120 Commands and feature sets supported or enabled 4014
H
121–126 Reserved for expanded supported and enabled settings 0000
H
WORD DESCRIPTION VALUE