Seagate 851SL Computer Drive User Manual


 
2. Open the Main menu.
3. Open the Control Panel.
4. Open Enhanced.386.
5. Select Virtual Memory.
6. Select Change.
7. Select 32-Bit Disk Access at the bottom of the screen to
change its status.
8. Select OK. Follow the screen instructions to reboot.
You can re-establish the 32-bit disk access capability using the
SEG32BIT.386 software as follows:
1. Load Windows.
2. Open the Program Manager menu and select File.
3. Select Run.
4. Load the Seagate software diskette.
5. In the command line box, type: drive:stsetup
6. Read the license agreement that appears on the screen. If you
agree to the terms, select
ACCEPT AGREEMENT to continue.
7. The next screen lists the features the SEG32BIT.386 driver
supports. If your computer supports these features, they will
be active in 32-bit disk access mode with SEG32BIT.386 for
all drives that support them. Select Install Driver to continue.
8. Once the driver is installed, you must enable the 32-bit disk
access option in the Windows control panel to make it opera-
tional. You can choose to enable the option now or later. If you
choose to enable the driver now, the program opens the
Windows main menu. Repeat steps 3 through 7 to enable
SEG32BIT.386 32-bit disk access.
24 Medalist SL Family Installation Guide, November 1995