Filter
Top Products
CONSTELLATION ES.1 SAS PRODUCT MANUAL, REV. G 28
1TB models in 6Gb operation
Please refer to Table 2 for power dissipation numbers.
To obtain operating power for typical random read operations, refer to the following I/O rate curve (see Figure 7.). Locate the typical I/O
rate for a drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and total watts on the
vertical axis. To calculate BTUs per hour, multiply watts by 3.4123.
Figure 7. 1TB models (6Gb) DC current and power vs. input/output operations per second
For power details about SED vs. non-SED drive, please refer to section 7.8.