Filter
Top Products
PULSAR.2 SAS PRODUCT MANUAL, REV. C 44
Protocol-Specific Port log pages (18h) Y
Read Error Counter page (03h) Y
Read Reverse Error Counter page (04h) N
Self-test Results page (10h) Y
Solid State Media log page (11h) Y
Start-stop Cycle Counter page (0Eh) Y
Temperature page (0Dh) Y
Vendor Unique page (3Ch) Y
Verify Error Counter page (05h) Y
Write error counter page (02h) Y
MODE SELECT (6) (same pages as MODE SENSE (6)) 15h Y [3]
MODE SELECT (10) (same pages as MODE SENSE (6)) 55h Y
MODE SENSE (6) 1Ah Y [3]
Caching Parameters page (08h) Y
Control Mode page (0Ah) Y
Disconnect/Reconnect (02h) Y
Error Recovery page (01h) Y
Format page (03h) N
Information Exceptions Control page (1Ch) Y
Background Scan mode subpage (1Ch/01h) Y
Notch and Partition Page (0Ch) N
Protocol-Specific LUN mode page (18h) Y
Protocol-Specific Port page (19h) Y
Power Condition page (1Ah) Y
Rigid Disc Drive Geometry page (04h) N
Unit Attention page (00h) Y
Verify Error Recovery page (07h) Y
Xor Control page (10h) N
MODE SENSE (10) (same pages as MODE SENSE (6)) 5Ah Y
PERSISTENT RESERVE IN 5Eh Y
PERSISTENT RESERVE OUT 5Fh Y
PRE-FETCH (10) 34h N
READ (6) 08h Y
READ (10) 28h Y
DPO bit supported Y
FUA bit supported Y
READ (12) A8h N
READ (16) 88h Y
READ (32) 7Fh/0009h Y
READ BUFFER (modes 0, 2, 3, Ah And Bh supported) 3Ch Y (non-SED drives only)
READ CAPACITY (10) 25h Y
READ CAPACITY (16) 9Eh/10h Y
READ DEFECT DATA (10) 37h Y
READ DEFECT DATA (12) B7h Y
READ LONG (10) 3Eh Y (non-SED drives only)
Table 16 Supported commands
COMMAND NAME COMMAND CODE SUPPORTED