Filter
Top Products
12 Pipeline HD SATA Product Manual, Rev. B
Drive Specifications www.seagate.com
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power
to operational levels
Power-on to ready (max)
<17s <17s
Standby to ready (max)
<17s <17s
Track-to-track seek time (typical)
<1.0ms read;
<1.2ms write
<1.0ms read;
<1.2ms write
Average seek (typical)
<12ms read;
<13ms write
<12ms read;
<13ms write
Startup current (typical) 12V (peak)
2.0A 2.0A
Voltage tolerance
(including noise)
5V: ± 5%
12V: ±10%
5V: ± 5%
12V: ±10%
Ambient temperature
0° to 75°C (operating)
–40° to 70°C (nonoperating)
0° to 75°C (operating)
–40° to 70°C (nonoperating)
Temperature gradient (max)
20°C per hour (operating)
30°C per hour (nonoperating)
20°C per hour (operating)
30°C per hour (nonoperating)
Relative humidity
5% to 95% (operating)
5% to 95% (nonoperating)
5% to 95% (operating)
5% to 95% (nonoperating)
Relative humidity gradient (max)
30% per hour 30% per hour
Wet bulb temperature (max)
37.7°C (operating)
40.0°C (nonoperating)
37.7°C (operating)
40.0°C (nonoperating)
Altitude, operating
–304.8m to 3,048m
(–1000 ft. to 10,000+ ft.)
–304.8m to 3,048m
(–1000 ft. to 10,000+ ft.)
Altitude, nonoperating
(below mean sea level, max)
–304.8m to 12,192m
(–1000 ft. to 40,000+ ft.)
–304.8m to 12,192m
(–1000 ft. to 40,000+ ft.)
Operational Shock (max)
80 Gs at 2ms 80 Gs at 2ms
Non-Operational Shock (max)
300 Gs at 2ms 300 Gs at 2ms
Vibration, operating
2Hz–22Hz: 0.25 Gs,
Limited displacement
22Hz–350Hz: 0.50 Gs
350Hz–500Hz: 0.25 Gs
2Hz–22Hz: 0.25 Gs,
Limited displacement
22Hz–350Hz: 0.50 Gs
350Hz–500Hz: 0.25 Gs
Vibration, nonoperating
5Hz–22Hz: 3.0 Gs
22Hz–350Hz: 3.0 Gs
350Hz–500Hz: 3.0 Gs
5Hz–22Hz: 3.0 Gs
22Hz–350Hz: 3.0 Gs
350Hz–500Hz: 3.0 Gs
Drive acoustics, sound power
Idle**
2.0 bels (typical)
2.2 bels (max)
2.0 bels (typical)
2.2 bels (max)
Seek
2.2 bels (typical)
2.4 bels (max)
2.2 bels (typical)
2.4 bels (max)
Nonrecoverable read errors
1 per 10
14
bits read 1 per 10
14
bits read
Warranty
To determine the warranty for a specific drive, use a web browser to access the
following web page: support.seagate.com/customer/warranty_validation.jsp
From this page, click on the “Verify Your Warranty” link. You will be asked to
provide the drive serial number, model number (or part number) and country of
purchase. The system will display the warranty information for your drive.
Load/Unload cycles
300K at 25°C, 50% rel. humidity
Supports Hotplug operation per the
Serial ATA Revision 3.0 specification
Yes
Table 1 Drive specifications summary for 2000GB and 1500GB Models (Continued)
Drive specification ST2000VM002 ST1500VM002