Filter
Top Products
Pipeline HD SATA Product Manual, Rev. B 35
www.seagate.com
Serial ATA Interface
81 Minor version number 0028
H
82 Command sets supported 346B
H
83 Command sets supported 7F01
H
84 Command sets support extension
(see note following this table)
4123
H
See Word 108-111
note. (4123
H
=
010000010010001 binary)
85 Command sets enabled 34xx
H
86 Command sets enabled BE01
H
87 Command sets enable extension 4123
H
88 Ultra DMA support and current mode (see note following this
table)
xx7F
H
89 Security erase time 00A9
H
90 Enhanced security erase time 00A9
H
92 Master password revision code FFFE
H
93 Hardware reset value xxxx
H
95–99 ATA-reserved 0000
H
100–103 Total number of user-addressable LBA sectors available (see
Section 2.2 for related information). These words are required for
drives that support the 48-bit addressing feature. Maximum
value: 0000FFFFFFFFFFFFh.
ST2000VM002 = 3,907,029,168
ST1500VM002 = 2,930,277,168
104–107 ATA-reserved 0000
H
108–111 The mandatory value of the world wide name (WWN) for the
drive. NOTE: This field is valid if word 84, bit 8 is set to 1 indicat-
ing 64-bit WWN support.
Each drive will have a unique
value.
112–127 ATA-reserved 0000
H
128 Security status 0001
H
129–159 Seagate-reserved xxxx
H
160–254 ATA-reserved 0000
H
255 Integrity word xxA5
H
Note
Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not
supported.
Note
See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data.
Table 7 Identify Device commands (Continued)
Word Description Value