Filter
Top Products
44 Cheetah 73LP Product Manual, Rev. E
9.3 SCSI interface commands supported
Table 5 following lists the SCSI interface commands that are supported in the SCSI-2, and SCSI-3 modes of
the drive. OEM standard drives are shipped set to operate in SCSI-2/SCSI-3 mode.
Table 5: Commands supported by Cheetah 73LP family drive
Command name
Command
code
Supported by
SCSI-2/3
Change definition 40h N
Compare 39h N
Copy 18h N
Copy and verify 3Ah N
Format unit [1] 04h Y
DPRY bit supported N
DCRT bit supported Y
STPF bit supported Y
IP bit supported Y
DSP bit supported Y
IMMED bit supported Y
VS (vendor specific) N
Inquiry 12h Y
Date code page (C1h) Y
Device behavior page (C3h) Y
Firmware numbers page (C0h) Y
Implemented operating def page (81h) Y
Jumper settings page (C2h) Y
Supported Vital product data page (00h) Y
Unit serial number page (80h) Y
Lock-unlock cache 36h N
Log select 4Ch Y
PCR bit Y
DU bit N
DS bit Y
TSD bit Y
ETC bit N
TMC bit N
LP bit N
Log sense 4Dh Y
Application client page (0Fh) N
Buffer over-run/under-run page (01h) N
Cache statistics page (37h) Y
Factory log page (3Eh) Y
Last n deferred errors or asynchronous events page (0Bh) N
Last n error events page (07h) N
Non-medium error page (06h) Y
Pages supported list (00h) Y
Read error counter page (03h) Y
Read reverse error counter page (04h) N
Self test results page (10h) Y
Start-stop cycles counter page (0Eh) N
Temperature page (0Dh) Y
Verify error counter page (05h) Y