Filter
Top Products
Barracuda 36ES2 Product Manual, Rev. B 61
9.6.4 Mating connectors
Part numbers for the different type connectors that mate with the various Barracuda 36ES2 I/O connectors are
given in the sections following.
9.6.4.1 Mating connectors for N model drives
N model drives require a nonshielded cable with a 50-conductor connector consisting of two rows or 25 female
contacts with adjacent contacts 100 mils apart.
Recommended mating flat cable connector part numbers are:
The drive device connector is a nonshielded 50-conductor connector consisting of two rows of 25 male pins
with adjacent pins 100 mils apart. The connector is keyed (see Figure 18).
Mating panel mount connector: 3M-CHE-2050-J01A10-KLE.
Figure 18. Nonshielded 50-pin SCSI device connector used on N drives
Closed end (for cable ends) [1] 3M-3425-7000
3M-3425-7050
Dupont-66900-290
W/O strain Relief, No Center Key
With Strain Relief, No Center Key
With Strain Relief, With Center Key
Open end (In daisy-chain) [1] 3M-3425-6000
3M-3425-6050
Dupont-66900-250
W/O strain Relief, No Center Key
With Strain Relief, No Center Key
With Strain Relief, With Center Key