Filter
Top Products
DB35.3 Series SATA/PATA Product Manual, Rev. F
5
* One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Drive acoustics, sound power
Idle** 2.6 bels (typical)
2.8 bels (max)
CE seek profile 2.7 bels (typical)
2.8 bels (max)
Nonrecoverable read errors 1 per 10
14
bits read
Annualized Failure Rate (AFR)*** 0.68%
Warranty 5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to access
the following web page: www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You will be asked to
provide the drive serial number, model number (or part number) and country
of purchase. The system will display the warranty information for your drive.
Contact start-stop cycles (25°C, 50% rel. humidity) 50,000
Supports Hotplug operation per Serial ATA Revision
2.5 specification
Yes
Drive specification ST3160215SCE,
ST3160215ACE
ST380215SCE,
ST380215ACE