Seagate ST4000DX001 Laptop User Manual


 
Seagate Desktop SSHD Product Manual, Rev. C 4
*All specifications above are based on native configurations.
** One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating
environment and formatting.
*** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
Hybrid time-to-ready specification assumes all needed data files are pinned to flash, Windows 8 environment, and fast BIOS implemented.
2.2 Formatted capacityy
*One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending
on operating environment and formatting.
Wet bulb temperature (max)
37.7°C max (operating)
40.0°C max (nonoperating)
Altitude, operating
–304m to 3048m
(–1000 ft to 10,000 ft)
Altitude, nonoperating
(below mean sea level, max)
–304m to12,192m
(–1000 ft to 40,000+ ft)
Operational shock (max) 80 Gs at 10ms
Nonoperational shock (max) 300 Gs at 2ms 350 Gs at 2ms
Vibration, operating
2Hz to 22Hz: 0.25 Gs, Limited displacement
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
Vibration, nonoperating
5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
Drive acoustics, sound power
Idle***
2.3 bels (typical)
2.5 bels (max)
2.4 bels (typical)
2.6 bels (max)
2.2 bels (typical)
2.4 bels (max)
Seek
2.8 bels (typical)
3.0 bels (max)
2.6 bels (typical)
2.7 bels (max)
2.4 bels (typical)
2.5 bels (max)
Non-recoverable read errors 1 per 10
14
bits read
Rated workload
Average rate of <55TB/year. The AFR specification for the drive assumes the I/O
workload does not exceed the average annualized workload rate limit of 55TB/year.
Workloads exceeding the annualized rate may degrade the drive AFR and impact
product reliability. The average annualized workload rate limit is in units of TB per year,
or TB per 8760 power-on hours. Workload rate limit = TB transferred × (8760/recorded
power-on hours).
Warranty
To determine the warranty for a specific drive, use a web browser to access the
following web page: http://www.seagate.com/support/warranty-and-replacements/
From this page, click on “Check to see if the drive is under Warranty”. Users will be
asked to provide the drive serial number, model number (or part number) and country of
purchase. The system will display the warranty information for the drive.
Load/Unload cycles (25°C, 50% rel. humidity) 300,000
Supports Hotplug operation per the
Serial ATA Revision 3.0 specification
Yes
Model
Formatted
capacity*
Guaranteed
sectors
Bytes per sector
ST4000DX001 4000GB 7,814,037,168
4K
ST2000DX001 2000GB 3,907,029,168
ST1000DX001 1000GB 1,953,525,168
Table 1 Drive specifications summary for 4TB, 2TB and 1TB models (continued)
Drive Specification* ST4000DX001 ST2000DX001 ST1000DX001