Filter
Top Products
34 Elite 23 Installation Guide, Rev. A
N drives
N/ND drives sectionSetting the SCSI ID jumpers
Use the J4A connector to set the SCSI ID (see Figure 7) on
model ST423451N. To change the SCSI ID, install jumpers on
the appropriate pins as shown in the illustration.
Figure 7. Setting the SCSI ID on N models
SCSI ID = 0 (default)
J4A
SCSI ID = 1
SCSI ID = 2
SCSI ID = 3
SCSI ID = 4
SCSI ID = 5
SCSI ID = 6
SCSI ID = 7
Pin 1
Pin 1
J01
J4B
Pin 1
J4A