Filter
Top Products
Seagate Archive HDD Product Manual, Rev. C 3
www.seagate.com
2.0 Drive Specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power.
For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following
drive models:
2.1 Specification summary tables
The specifications listed in Table 1.
For details on specification measurement or definition, refer to the appropriate section of this manual.
Standard
models
Self-Encrypting
(SED) models
ST5000AS0011 ST5000AS0001
Table 1 Drive specifications summary for 5TB model
Drive Specification* ST5000AS0011 and ST5000AS0001
Formatted capacity (512 bytes/sector)* 5000GB (5TB)
Guaranteed sectors 9,767,541,168
Heads 8
Disks 4
Bytes per sector
(4K physical emulated at 512-byte sectors)
4096
Recording density, KFCI (max) 1807
Track density, KTPI (ktracks/in avg.) 455
Areal density, (Gb/in2 avg) 826
Spindle speed (RPM) 5900
Internal data transfer rate (Mb/s max) 1813
Average data rate, read/write (MB/s) 146
Sustained data transfer rate OD (MB/s max) 180
I/O data-transfer rate MB/s max) 600
ATA data-transfer modes supported
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
Cache buffer 128MB
Height (max) 26.1mm / 1.028 in
Width (max) 101.85mm /4.010 in
Length (max) 147.00mm / 5.787 in
Weight (typical) 655g (1.44 lb)
Average latency 5.1ms
Power-on to ready (sec max) 30.0
Standby to ready (sec max) 17.0
Average seek, read (ms typical)
Average seek, write (ms typical)
<12.0
<12.0
Startup current (typical) 12V (peak) 2.0A
Voltage tolerance (including noise)
5V: ± 5%
12V: ±10%
Ambient Temperature
0 to 60°C (operating)
-40 to 70°C (non-operating)
Temperature gradient (°C per hour max)
20°C (operating)
30°C (non-operating)
Relative humidity
5% to 90% (operating)
5% to 95% (non-operating)
Relative humidity gradient (per hour max) 30%