Filter
Top Products
Seagate Surveillance HDD Product Manual, Rev. B 18
www.seagate.com Configuring and Mounting the Drive
3.4 Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting
holes. Refer to
Figure 2 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:
• Allow a minimum clearance of 0.030 inches (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.150 inch (3.81mm) into the bottom or side mounting holes.
• Do not overtighten the mounting screws (maximum torque: 6 inch-lb).
Figure 2 Mounting dimensions (5TB model)
Figure 3 Mounting dimensions (6TB model)
Temperature
Check Point
4.010 in max
101.85 mm
5.787 in max
146.99 mm
3x 0.250 ± .010 in
6.35 ± .25 mm
BOTH SIDES
1.028 in max
26.11 mm
0.680 ± .050 in
17.27 ± 1.27 mm
4.00 in
101.60 mm
1.638 in
41.61 mm
3X 6-32 UNC-2B
3 MIN THREAD DEPTH
0.15 MAX FASTENER
PENETRATION
MOUNTING HOLES
BOTH SIDES
1.22 ± .020 in
30.99 ± .51 mm
0.138 in
3.51 mm
0.814 in
20.68 mm
OF CONNECTOR
DATUM B
OF DRIVE
C
L
C
L
TOP OF LABEL
5 TYP
1.140 ± .050 in
28.96 ± 1.27 mm
3.750±.010
2X 1.625±.020
2X 3.000±.010
.127±.010
4.000±.010
1.432±.019
2
.814±.020
2
4X 6-32 UNC 2B
3 MIN THREAD DEPTH
.15 MAX FASTENER PENETRATION
MOUNTING HOLE.
MAX TORQUE 6 IN/LBS
B
Y
5.787 MAX
146.99 MM
.250±.010
2X 4.000±.010
2X 1.122±.020
2X 6-32 UNC 2B
3 MIN THREAD DEPTH
.15 MAX FASTENER PENETRATION
MOUNTING HOLES BOTH SIDES.
MAX TORQUE 6 IN/LBS
Z
Y
1.028 MAX
26.11 MM
.142±.015
2
2.000
C
L
OF DRIVE
C
L
OF DRIVE
C
L
OF CONN
Z