Filter
Top Products
SEAGATE ULTRA MOBILE SSHD PRODUCT MANUAL, REV. D 25
SERIAL ATA (SATA) INTERFACE
60–61
Total number of user-addressable sectors
This field contains a value that is one greater than the total number of
user-addressable sectors. The maximum value that shall be placed in this
field is 0FFFFFFFh. The 0FFFFFFFh value applies to all capacities over
137GB (see Section 2.1 for related information).
ST500LX009 = 0FFFFFFFh
ST500LX010 = 0FFFFFFFh
ST500LX011 = 0FFFFFFFh
ST500LX012 = 0FFFFFFFh
ST500LX013 = 0FFFFFFFh
ST500LX014 = 0FFFFFFFh
ST500LX015 = 0FFFFFFFh
ST500LX016 = 0FFFFFFFh
62 Retired 0000
H
63
Multiword DMA active and modes supported
(see note following this table)
xx07
H
64 Advanced PIO modes supported (modes 3 and 4 supported) 0003
H
65 Minimum multiword DMA transfer cycle time per word (120 ns) 0078
H
66 Recommended multiword DMA transfer cycle time per word (120 ns) 0078
H
67 Minimum PIO cycle time without IORDY flow control (240 ns) 0078
H
68 Minimum PIO cycle time with IORDY flow control (120 ns) 0078
H
69–74 ATA-reserved 0000
H
75 Queue depth 001F
H
76 Serial ATA capabilities 0D06
H
77 ATA-reserved 0000
H
78 Serial ATA features supported 0048
H
79 Serial ATA features enabled 0048
H
80 Major version number 01F0
H
81 Minor version number 0029
H
82 Command sets supported 746B
H
83 Command sets supported 7D69
H
84 Command sets support extension 61E3
H
85 Command sets enabled 7469
86 Command sets enabled BC49
H
87 Command sets enable extension 61E3
H
88 Ultra DMA support and current mode (see note following this table) xx7F
H
89 Security erase time xxxx
H
90 Enhanced security erase time xxxx
H
91 Current APM values 8080
H
92 Master password revision code FFFE
H
93 Hardware reset value (see description following this table) xxxx
H
94 Auto acoustic management setting xxxx
H
95 Stream Min. Request Size 0000
H
96 Streaming Transfer Time - DMA 0000
H
97 Streaming Access Latency - DMA and PIO 0000
H
98-99 Streaming Performance Granularity 0000
H
Table 10 Identify Device command
Word Description Value