Filter
Top Products
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 2
1.0 Introduction
This manual describes the functional, mechanical and interface specifications for the following:
Seagate
®
Enterprise Capacity 3.5 HDD v4 Serial ATA model drives:.
These drives provide the following key features:
• 7200 RPM spindle speed.
• 128 MB data buffer.
• PowerChoice™ for selectable power savings
• Top Cover Attached motor for excellent vibration tolerance
• High instantaneous (burst) data-transfer rates (up to 600MB per second).
• Perpendicular recording technology provides the drives with increased areal density.
• State-of-the-art cache and on-the-fly error-correction algorithms.
• Native Command Queueing with command ordering to increase performance in demanding applications.
• Full-track multiple-sector transfer capability without local processor intervention.
• SeaTools™ diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
• Support for S.M.A.R.T. drive monitoring and reporting.
• Supports latching SATA cables and connectors.
• Worldwide Name (WWN) capability uniquely identifies the drive.
For more information on FIPS 140-2 Level 2 certification see See Section 4.0 on page 25 .
Standard 4KN
models
Standard 5xxE
models
Self-Encrypting
4KN (SED) models
Self-Encrypting
5xxE (SED) models
FIPS 140-2 Level 2
(Review Pending)
ST6000NM0004 ST6000NM0024 ST6000NM0064 ST6000NM0044
4KN model
ST5000NM0084 ST6000NM0094
ST4000NM0004 ST4000NM0024 ST4000NM0064 ST4000NM0044
5xxE model
ST2000NM0004 ST2000NM0024 ST2000NM0064 ST2000NM0044 ST6000NM0084
Note
Seagate recommends validating the configuration with the selected HBA/RAID
controller manufacturer to ensure use of full capacity is supported.