Filter
Top Products
Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C 5
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational
levels.
Altitude, nonoperating
(below mean sea level, max)
–304.8 m to 12,192 m
(–1000 ft to 40,000+ ft)
Operational Shock (max at 2 ms) Read 70 Gs / Write 40 Gs
Non-Operational Shock (max at 2 ms) 250 Gs
Vibration, operating
5–22 Hz: 0.25 Gs, Limited displacement
22–350 Hz: 0.50 Gs
350–500 Hz: 0.25 Gs
Operation Rotational vibration 20–1500Hz: 12.5 rads/s²
Vibration, nonoperating 10–500 Hz: 4.9 Grms ref
Drive acoustics, sound power (bels)
Idle**
2.8 (typical)
3.0 (max)
Performance seek
3.2 (typical)
3.4 (max)
Nonrecoverable read errors 1 sector per 10
15
bits read
Annualized Failure Rate (AFR) 0.63% based on 8760 POH
Warranty
To determine the warranty for a specific drive, use a web browser to access the following web page:
http://www.seagate.com/support/warranty-and-replacements/.
From this page, click on the “Check to see if the drive is under Warranty” link. The following are required to be
provided: the drive serial number, model number (or part number) and country of purchase.The system will
display the warranty information for the drive.
Load-unload cycles 600,000
Supports Hotplug operation per
Serial ATA Revision 3.2 specification
Yes
Drive specification
ST6000NM0004, ST6000NM0024
ST6000NM0064, ST6000NM0044
ST6000NM0084, ST6000NM0094
ST5000NM0084
ST4000NM0004
ST4000NM0024
ST4000NM0064
ST4000NM0044
ST2000NM0004
ST2000NM0024
ST2000NM0064
ST2000NM0044