Seagate ST9160821AB Server User Manual


 
6
Momentus 5400.3 PATA Blade Server Product Manual, Rev. B
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur, according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby
modes will not contribute to battery power consumption.
Shock, nonoperating (Gs max at 1 msec) 900
Shock, nonoperating (Gs max at 0.5 msec) 400
Vibration, operating
(max displacement may apply below 10 hz)
1.0 Gs (0 to peak, 5–500 Hz)
Vibration, nonoperating
(max displacement may apply below 22 hz)
5.0 Gs (0 to peak, 5–500 Hz)
Drive acoustics, sound power (bels), 2 disc
Idle** 2.4 (typical)
2.6 (max)
Performance seek 2.9 (typical)
3.1 (max)
Nonrecoverable read errors 1 per 10
14
bits read
Annualized Failure Rate (AFR) <1.79%
Load/Unload (U/UL) cycles
25°C, 50% relative humidity
32°C, 80% relative humidity
5°C, 80% relative humidity
5°C, 20% relative humidity
60°C, 20% relative humidity
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
Warranty 5 years on distribution units.
To determine the warranty for a specific drive, use a web browser
to access the following web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You will
be asked to provide the drive serial number, model number (or
part number) and country of purchase. The system will display
the warranty information for your drive.
Table 1: Specifications for 100 and 80 Gbyte models
Drive specification ST9100828AB ST980815AB