Filter
Top Products
14 Hardware Installation Guide
Mounting the Print Server
The print server is a so-called slot card that is simply inserted into the provided slot.
Use KUIO 3,3 Volt Interfaces ONLY!
For more information,
please consult your retailer.
THE USE OF A 5 VOLT INTERFACE
WILL DAMAGE YOUR PRINT SERVER!
Prepare the printer
Proceed as follows:
1. Turn the printer off.
2. Disconnect the printer's power cord.
3. Remove the screws from the interface cover.
4. Remove the metal cover.
Insert the print server
Proceed as follows:
1. Insert the print server board into the slot until the board locks
into the receptacle.
2. Fasten the print server board screws.