Filter
Top Products
2
Delivery includes
y
MZA 900 P with belt clip
y
Instructions for use
y
Warranty certificate
Connecting the microphone
Connect the jack plug of the
microphone to the socket of
the MZA 900 P. Lock the jack
plug by screwing down the
coupling ring. This prevents
accidental loosening of the
connection and annoying
noise when the cable is
moved.
Output
The XLR output of the
MZA 900 P together with the back-electret condenser
microphone delivers the correct signal phase (an increase
in sound pressure in front of the microphone diaphragm
causes a positive voltage to appear at pin 2 and a negativ
voltage to appear at pin 3). The output is electronically
balanced and floating.
Use a balanced XLR cable to connect the XLR output to
the phantom powered microphone input of the
subsequent device. If necessary, you can do without the
cable and connect the MZA 900 P directly to the XLR
input socket of the device.
MZA 900 P_516535_0606_Sp6.book Seite 2 Mittwoch, 12. Juli 2006 3:19 15