Sharp AM-400 Printer User Manual


 
AM-300/400
QUICK SETUP GUIDE
AM-400 only: Connect the phone line cord
to the TEL. LINE jack and a wall jack.
Italy: Use the provided adapter to connect the
line cord to the wall socket.
1
7
Attach the trays.
3
Load paper.
Make sure you have the following items. If any
are missing, contact your dealer or retailer.
Note: The shape of the line cord plug varies by
country. An adapter (not shown) is provided in
some countries.
1. Remove the output tray.
4
5
6
Install the toner cartridge and drum cartridge.
2. Remove the drum cartridge from its
packaging.
4. Remove the toner cartridge from its
packaging. Shake the cartridge side
to side four or five times to distribute
the toner evenly within the
cartridge.
3. Insert the drum cartridge,
sliding it along the guides.
5. Insert the toner cartridge, sliding it along
the guides
until it clicks into place
.
7. Press
to select “YES” and
then press . (This resets
the toner cartridge counter.)
8. Reset the drum cartridge counter:
a.Press
once and then or
until “LIFE” appears in the
display.
b. Press and then .
c. Press repeatedly to exit.
MENU
Z
A
6. Close the front cover and
then the side cover
.
PRINTED IN THAILAND (TCADH3785XHZZ)
Display:
1:YES, 2:NO
TONER EXCHANGED?
2. Insert a stack of paper
into the tray, print side up.
1. Press
. Open the side cover
and then the front cover .
Important:
Pull the scanner release toward you to
release the scanner lock.
Caution: Be sure to release the scanner lock
before plugging in the power cord.
Plug the power cord into a standard, earthed
power outlet.
Note: The power outlet must be installed
near the equipment and must be easily
accessible.
2
1
2
3
Caution!
Do not touch the fusing unit
under the side cover after the
machine has been in operation,
as it may become very hot.
Grasp this handle to
push the cartridge in
Press on the arrow
mark to make sure
the cartridge clicks
into place
2
1
Toner
cartridge
Telephone line
cord
(AM-400
only)
Drum
cartridge
CD-ROM
Setup
Guide
Document
feeder tray
Output tray
When the tray
stops, lift the
end slightly
and push in.
3. Squeeze the sides of the paper
guide and slide it to the slot for
the length of paper loaded.
4. Replace the output tray.
TEL.
LINE
TEL.
SET
For detailed instructions
on setting up and using the AM-300/400, see the
online guide on the CD-ROM.
To open the guide, double-click the Manual folder on
the CD-ROM, double-click English, and then double-
click Online Manual.pdf.
(Note: Acrobat Reader 5.05 or higher is required to
view the manual.To install Version 5.05, double-click
Acrobat Reader, English, and then ar505enu.exe
on the CD-ROM.)
All company names and product names appearing in this
setup guide are the trademarks of their respective owners.
English
AM-400 only: Set the date and time
that appear in the fax mode display.
1. In the date and time display of fax mode
(press if needed to select fax
mode), press , , .
2. Enter a two-digit number for the day
("01" to "31").
Example: the 5th
To clear a mistake press .
3. Enter a 2-digit number for the month.
Example: February
4. Enter the year (four digits)
Example:
FAX
MENU
Z
8
5. Enter a two-digit number for the hour
(00 to 23) and a two-digit number for
the minute (00 to 59).
Example: 9:25
6. Press .
7. Press repeatedly to exit.
ENTER
The stack should
not be higher
than this line
Note: The
shape of the
power plug
varies by
country
Note: The
shape of the
line cord plug
varies by
country.