Filter
Top Products
21
3
Special functions
USER PROGRAMS
Press the print ( ) key. The entered program number will be steadily lit and the
currently selected parameter number for the program will blink on the right side of the
display.
Select the desired parameter using the right copy quantity ( ) key. The entered
parameter number will blink on the right of the display.
Program
Mode Parameters
No.
1 Auto clear time 0 OFF 1 30 sec. * 2 60 sec.
3 90 sec. 4 120 sec. 5 10 sec.
2 Preheat mode 0 30 sec. 1 60 sec. * 2 90 sec.
3 Auto power shut- 0 2 min. * 1 5 min. 2 15 min.
off timer 3 30 min. 4 60 min. 5 120 min.
4 Stream feeding 0 OFF * 1 ON
mode
5 Auto power shut- 0 OFF * 1 ON
off mode
Factory default settings are indicated with an asterisk (*).
Press the print ( ) key. The right-hand number in the display will be steadily lit and
the entered value will be stored.
To change the setting or to set another mode, press the clear ( ) key. The
copier will return to step 2.
Press the light ( ) or dark ( ) key to return to the normal copy mode.
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
Press the clear ( ) key to reset the display to zero.
Press and hold down the clear ( ) key for approximately 5 seconds. The total number
of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.