Filter
Top Products
SPECIAL MODES
6-10
1
Touch the [COVERS] key on the SPECIAL
MODES screen.
The COVERS setting
screen will appear.
The covers icon ( ,
etc.) will also appear in
the upper left of the
screen to indicate that
the function is turned on.
2
Select cover placement.
Select [FRONT], [BACK] or [FRONT+BACK] on
the touch panel.
3
Indicate whether the front cover sheets
are copied on or not.
Select [YES] or [NO] on
the touch panel. If [YES]
is selected, the first page
of the document will be
copied onto the front
cover sheet.
4
Touch the [OK] key on the COVER setting
screen.
Return to the SPECIAL MODES screen.
5
Touch the [OK] key on the SPECIAL
MODES screen.
Return to the main screen of copy mode.
6
Load the cover paper to be used into the
bypass tray.
Load the same size of
paper as the paper to be
used for the copy job. If
the saddle stitch finisher
is to be used for stapling,
heavy stock cannot be
used for the covers.
(See page 2-10) Paper
within the range of the
stapler must be used.
FT
ERASE
C
ADJU
COVERS
D
P
ENCY
OKCANCEL
OK
COVERS
SPECIAL MODES
FRONT BACK FRONT+BACK
PRINT ON FRONT COVER?
YES NO
OKCANCEL
PRINT ON FRONT COVER?
YES
NO
About the steps that follow
See pages 5-2 through 5-6.
NOTE
Be sure to place the originals in the document feeder
tray of the reversing automatic document feeder.
The document glass cannot be used for this function.
NOTES
● When copying a cover in color, only one copy can
be made, even if a setting is entered for the
number of copies. If you require multiple copies,
reload the original and repeat the copy procedure
as many times as needed.
● During cover copying, the stream feeding mode
will not function even if it is turned on by the
program on page 10 of the key operator's guide.
● During cover copying, the pamphlet copy function
(page 6-25) and the saddle stitch (pamphlet
staple) function (page 3-5) will not operate.
To cancel the COVERS function, select the
COVERS function again and touch the [CANCEL]
key (step2).
00-08.book 10 ページ ２００２年１１月８日 金曜日 午前９時３９分