Filter
Top Products
2-11
CHAPTER2
MAKING COPIES Reduction/Enlargement/Zoom
Automatic selection
1
Place the original on the document glass or in the
optional document feeder tray.
●
The original size will be detected and indicated on the touch
panel.
2
Press the “PAPER SELECT” key on the touch panel and
select the paper tray with the desired paper size.
NOTE:
This feature will not work when original or copy paper is of non-
standard size.
3
Press the “AUTO IMAGE” key on the touch panel.
●
The best reduction or enlargement ratio for the selected paper
size will be automatically set and displayed on the touch panel.
●
If the originals and the selected copy paper are not facing the
same direction, the following message will appear to indicate
how the original should be placed.
ROTATE ORIGINAL FROM TO .
4
Enter the desired number of copies.
5
Press the COLOR COPY START ( ) key or BLACK
COPY START (
) key.
●
To cancel the automatic reduction/enlargement mode, press the
“AUTO IMAGE” key again.
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either
automatically with the “AUTO IMAGE” key or manually with the
reduction, enlargement or “ZOOM” keys on the touch panel. The
zoom function enables precise copy ratio selection from 25% to
400% in 1% increments.
★ KEY OPERATOR A total of four extra preset copy ratios, two each
for reduction and enlargement, can be added. See page 19 of the KEY
OPERATOR’S GUIDE.
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
1.8/ 11
2.11 17
3.8/ 14
1
2
1
2
16~28 lbs.
28+~35 lbs.
35+~75 lbs.
TRANSPARENCY
PAPER TYPE
11
17
14
SELECT
100%
COPY RATIO
AUTO IMAGE
11 17
C
CA
CLEAR
INTERRUPT
CLEAR
ALL
12
3
456
789
0
P
C
CL
PROGRAM
AUDIT
INTE
CLE
AL