Filter
Top Products
9
BEFORE USING THE FAX FUNCTION
1
(14) [MODE SELECT] keys (step 1 on page 18)
These are used these keys to change modes.
(15) [FAX] key/FAX indicator/LINE indicator/DATA
indicator
Press to switch to fax mode. The base screen of
fax mode will appear in the display.
The LINE indicator lights up during transmission
or reception of a fax. When a fax has been
received, the DATA indicator blinks. (When there
is fax transmission data in memory, the DATA
indicator lights up.)
(16) [PROGRAM] key (page 45)
Press this key to use a program.
(17) [RESOLUTION] key (page 15)
This key is used to select resolution and
exposure settings.
(18) [ADDRESS] key (page 21)
This key is used to search for a fax destination
that has been stored as an auto-dial number in
the address book.
(19) [BROADCAST] key (page 32)
This is used to perform a broadcast transmission.
(20) [ORIGINAL SIZE] key (page 14)
This is used to set the size of the original to be
faxed.
(21) [DUPLEX SCAN] key (page 22)
Press this key to use the duplex scan function.
(Only on models with a RSPF installed.)
(22) [SPECIAL FUNCTION] key
This key is used to select a special transmission
or reception function, configure function settings,
and to store auto-dial numbers.
(23) Arrow keys ( )
These are used to select items and move through
pages.
(24) [START] key ( )
This is used at the following times:
(1) When starting transmission
(2) When scanning an original
(3) When starting manual reception
(4) When configuring and storing settings
ABC DEF
JKLGHI MNO
TUVPQRS WXYZ
@.-
_
COPY
EXPOSURE
PAPER
SELECT
COPY
RATIO
AUTO
IMAGE
OUTPUT
2-SIDED
COPY
SPECIAL FUNCTION
ACC. #-C
READ-END
SCAN
FAX
COLOUR MODE
PROGRAM
FORMAT
BROADCAST
OK
BACK
FAX STATUS
RESOLUTION
ADDRESS
ORIGINAL SIZE DUPLEX SCAN
(2) (3) (4) (5) (6) (7) (8)
(16)
(17) (18) (19) (20) (21) (22) (23) (24)
• When the auto power shut-off function is
activated, All lights except the mode key
lights go off. For the information on the
auto power shut-off function, see the
"Operation manual (for general
information and copier)."
• For information on the keys and lights
which are used for the copy function and
other functions, see "Operation Panel" in
the manual for each function.
Note