Filter
Top Products
5
OPERATION AT THE MACHINE
44
CONTENTS INDEX
Configuring the printer condition settings
(part 7)
PCL SETTINGS
Item Selections Description
PCL SYMBOL SET
SETTING
1 - 35 This specifies which country's characters (PCL symbol set) are assigned to
certain of the symbols in the character code list. The factory default setting is
"3" (PC-8). The numbers corresponding to each PCL symbol set can be viewed
by printing "PCL SYMBOL SET LIST" in "LIST PRINT" in the custom settings.
☞
Printing the printer setting and font lists
PCL FONT SETTINGS
INTERNAL FONT (0 -
80)
, EXTENDED FONT
(1 - )
This specifies which PCL font to use for printing. One font can be specified from
among the internal fonts and extended fonts (when the barcode font kit is
installed). The factory default setting is "0" (internal font: Courier).
The fonts that are available can be viewed by printing the font list in "LIST
PRINT" in the custom settings. The font names, numbers assigned to each
font, and print samples appear in the list. A font is specified for PCL FONT
SETTINGS by entering the number assigned to the font.
☞
Printing the printer setting and font lists
LINE FEED CODE
0
- 3
This specifies the line break code by means of a combination of the "CR"
(return) code, "LF" (line break) code, and "FF" (page break) code. The factory
default setting is printing based on the transmitted code. The setting can be
changed by selecting one of four combinations.
WIDE A4 Enabled,
Disabled (no
checkmark)
This setting can be enabled to print 80 lines on A4 size paper with each line
10CPI font (English characters). When the setting is disabled (a checkmark
does not appear), each line is 78 characters long.