Filter
Top Products
FINISHER AND SADDLE STITCH FINISHER
3-3
3
*For index paper, equivalent to 140-lbs.
*1 Multiple punch modules cannot be installed together. Some models may not be available in some regions.
*2 With AR-PN4B, two or three holes can be punched depending on the paper size.
*3 With AR-PN4C and AR-PN4D, the number of holes is the same. The hole interval, however, is not the same.
Specifications are subject to change for improvement without notice.
■
■■
■ Supplies
The finisher and saddle stitch finisher require the following staple cartridge:
● Staple cartridge for finisher
(approx. 5,000 per cartridge X
3 cartridges)
SF-SC11
● Staple cartridge for saddle
stitch finisher (approx. 2000
per cartridge X 3 cartridges)
AR-SC3
Paper size
Upper paper tray/Middle paper tray:
A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17",
8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 7-1/4" x 10-1/2"R,
5-1/2" x 8-1/2"R
Upper paper tray/Middle paper tray:
A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17",
8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2"
x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R
Lower tray:
A3, B4, A4R, 11" x 17", 8-1/2" x 11"R
Paper weight
Upper paper tray/Middle paper tray:
60 to 256 g/m
2
(16 to 68* lbs.)
Upper paper tray/Middle paper tray/Lower tray:
60 to 256 g/m
2
(16 to 68* lbs.)
Paper full detection Both upper and lower tray Upper, middle and lower tray
Paper sizes for which
offset is possible
A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R
Allowed paper sizes for
stapling
Upper paper tray/Middle paper tray:
A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x
14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R
Upper paper tray/Middle paper tray:
A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14",
8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R
Lower tray:
A3, B4, A4R, 11" x 17", 8-1/2" x 11"R
Maximum number of
sheets for stapling
See "Staple sort mode" on 3-4 page
Stapling positions 1 place at back, 1 place at back (diagonal), one place at front (diagonal), 2 places
Paper conveying Centre reference
Power supply Supplied from machine
Dimensions
When tray is folded up: 648 mm (W) x 630 mm (D) x1150 mm(H)
(25-33/64" (W) x 24-13/16" (D) x 45-9/32" (H))
When tray is extended: 773 mm (W) x 630 mm (D) x1150 mm(H)
(30-7/16" (W) x 24-13/16" (D) x 45-9/32" (H))
Not including stopper (40 mm (1-37/64")) when attached to machine
Weight Approx. 51 kg (Approx. 113 lbs.) Approx. 71 kg (Approx. 157
lbs.
)
Overall dimensions when
attached to machine
773 mm (W) x 630 mm (D) (Separation from machine 400 mm)
(30-7/16" (W) x
24-13/16
" (D) (Separation from machine 15-3/4")
Name Punch module
Model*
1
AR-PN4A AR-PN4B*
2
AR-PN4C*
3
AR-PN4D*
3
Number of holes 2 3 or 2 4 4
Paper sizes for hole
punching
A3, B4, A4, A4R, B5,
B5R,
11"x17", 8-1/2"x14",
8-1/2"x13",
8-1/2"x11",
8-1/2"x11"R
3 holes: A3, A4,
11" x 17",
8-1/2" x 11"
2 holes: 8-1/2"x14",
8-1/2"x13",
8-1/2" x 11"R
A3, A4
A3, B4, A4, A4R, B5,
B5R,
11"x17", 8-1/2"x14",
8-1/2"x13",
8-1/2"x11",
8-1/2"x11"R
Paper weight 60 to 256
g/m
2
(16 to 68 lbs.)
Power supply Supplied from finisher / saddle stitch finisher
Dimensions 95 mm (W) x 560 mm (D) x 170 mm (H) (3-3/4
"
(W) x 22-1/16
"
(D) x 6-45/64
"
(H))
Weight Approx. 3.5 kg (Approx. 7.8 lbs.)
NOTES
● The following papers cannot be stapled and punched:
Special papers such as transparency film and label sheets
● If mixed paper sizes are selected for stapling jobs, stapling will be automatically cancelled.