Filter
Top Products
18
DK-A1
DK-A1BK
Radio
Listening to the radio (continued)
Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
Note:
The backup function protects the memorized stations for a few days
should there be a power failure or the AC power cord becomes
disconnected.
To recall a memorized station
To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
To erase entire preset memory
1 Perform steps 1 - 3 in “Tuning” on page 17.
2 Press the MEMORY button on remote control to enter the
preset tuning saving mode.
3 Within 1 minute, press the or button to select the
preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4 Within 1 minute, press the MEMORY button on remote
control to store that station in memory.
If the “MEMORY” and preset number indicators disappear
before the station is memorized, repeat the operation from step
2.
5 Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorized for that preset channel number will be erased.
Press the or button for less than 0.5 seconds to select the
desired station.
1 Press the or button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the or button again when the desired station is
located.
1 Press and hold the CLEAR button on remote control for more
than 3 seconds. “TUN CLEAR” will be displayed.
2 Within 10 seconds, press the MEMORY button on remote
control. “COMPLETE” will be displayed.
CLOCK
DIMMER
SNOOZE
ALARM
ON/OFF
ALARM
TUNER
AUX
iPod
FUNCTION
CLOCK
SLEEP ALARM
SNOOZE/
DIMMER
VOL
DISPLAY
PLAY
MODE
TUNING
MEMORY
EQ
CLEAR
E SOUND
/DEMO
MEMORY