Filter
Top Products
19
DISPLAYS
The operator display consists of a two-line dot-matrix display (16 characters/line).
• Cashier/server code or mode name
The mode you are in is displayed. When a cashier/server is assigned, the cashier/server code is
displayed in the REG or OP X/Z mode. For example, “0001” is displayed when cashier/server 0001 is
assigned.
• Repeat
The number of repeats is displayed, starting at “2” and increments with each repeat. When you have
registered an item ten times, the display will show “0”. (2 ➞ 3 ......9 ➞ 0 ➞ 1 ➞ 2...)
• Sentinel mark
When amounts in the drawer reaches the amount you preprogrammed, the sentinel mark “X” is
displayed to advice you to remove the money to a safe place.
• Power save mark
When the cash register goes into the power save mode, the power save mark (decimal point) is
displayed.
• Stock alarm indicator
When the stock counter of the PLU or UPC which you entered is zero or negative, the alarm indicator
(decimal point) is displayed.
• Function message display area
Item labels of departments and PLU/subdepartments/UPC and function text you use, such as %1, (–)
and CASH are displayed here. For the details of function texts, please refer to pages 146 to 149.
When an amount is to be entered or entered, “AMOUNT” is displayed: When an amount is to be
entered, – – – – – – – is displayed in the numeric entry display area with “AMOUNT”. When a preset
price has been set, the price is displayed in the numeric entry display area with “AMOUNT”.
• Numeric entry display area
Numbers entered using numeric keys are displayed here.
Date and time display
Date and time appear on the display in the OP X/Z, REG, or MGR mode. In the REG or MGR mode, press
the key to display the date and time.
Error messages
When an error occurs, the corresponding error message is displayed in the function message display area.
For the details of error messages, please refer to the “Error message table” on page 223.
Customer display (Pop-up type)
2
#/
TM
Function message display area
Cashier/server code or mode name
Numeric entry display area
Receipt OFF indicator (“_”)
/
Stock alarm indicator (“
•
”)
Repeat
/
Sentinel mark
/
Power save mark
Dept. name
/
PLU or UPC name
/
function text
Price level
/
PLU level (e.g. P2L3)
Operator display
1