Filter
Top Products
Loading the Imaging Film
14
Loading the Imaging Film
Your fax uses a roll of imaging film to create printed text and images. The print
head in the fax applies heat to the imaging film to transfer ink to the paper.
Follow the steps below to load or replace the film.
1 Remove any paper from the paper tray
and open the operation panel (press
➊).
2 Remove the used film and
empty spool.
3 Remove the two green gears from the
spools.
DO NOT DISCARD THE TWO GREEN
GEARS!
1
2
When replacing the film,
use a roll of Sharp FO-
6CR imaging film. One
roll can print about 150
A4-size pages.
The initial starter roll of
imaging film included with
your fax can print about
30 A4-size pages.
If you are loading the imaging film for
the first time, go to Step 4.