Sharp MX-2300G All in One Printer User Manual


 
8
CONNECTORS
(1) USB connecter (A type)
This is used to connect a USB hub or USB memory
device to the machine.
For the USB cable, use a shielded type cable.
(2) USB connecter (B type )
A computer can be connected to this connector to use
the machine as a printer.
For the USB cable, use a shielded type cable.
(3) LAN connecter
Connect the LAN cable to this connector when the
machine is used on a network.
For the LAN cable, use a shielded type cable.
(4) Service-only connector
(1)
(2)
(3)
(4)
Caution
Connecting a cable to this connector may cause the
machine to malfunction.
Important note for service technicians:
The cable connected to the service connector must be
less than 3 m (118") in length.