Filter
Top Products
18
Basic Specications / Copier specications
Name MX-2610N/MX-3110N/MX-3610N
Type Desktop
Colour Full colour
Copier system Laser electrostatic copier
Scanning
resolution
Scan (B/W): 600 × 600 dpi, 600 × 400 dpi, 600 × 300 dpi
Scan (full colour): 600 × 600 dpi
Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi
Gradation Scan: equivalent to 256 levels / Print: equivalent to 256 levels
Original paper
sizes
Max. A3 (11" x 17”) for sheets and bound documents
Copy sizes
A3 wide (12" × 18") to A5R, 5-1/2" × 8-1/2"R, Transparency lm, Heavy paper, Envelopes
Tray 1-4: A3, B4, A4, A4R, B5, B5R, A5R, 11" × 17", 8-1/2" × 14", 8-1/2" × 13-1/2", 8-1/2" × 13-2/5",
8-1/2" × 13", 8-1/2" × 11", 8-1/2" × 11"R, 7-1/4 × 10-1/2"R, 5-1/2" × 8-1/2"R
Multi-bypass tray: A3 wide (12" × 18") to A5R, 5-1/2" × 8-1/2"R, Transparency lm, Heavy paper,
Envelopes
Lost margin (leading edge): 4 mm (11/64") ± 1 mm (± 3/64")
Lost margin: (trailing edge): 2 mm (6/64") - 5 mm (- 13/64")
Leading edge / trailing edge: total 8 mm (21/64") or less
Near edge / far edge: total 4 mm (11/64") ± 2 mm (± 6/64") or less
Warm-up time
20 seconds or less
This may vary depending on the ambient conditions.
First-copy time
MX-2610N MX-3110N MX-3610N
Full colour: 8.1 seconds 7.9 seconds 6.8 seconds
B/W: 5.9 seconds 5.8 seconds 5.2 seconds
This may vary depending on the state of the machine.
Continuous
copying speeds*
(when shifter is
not in operation)
MX-2610N
A4, 8-1/2" × 11" B5, 7-1/4" × 10-1/2" 26 copies/min.
A4R, 8-1/2" × 11"R B5R, 7-1/4" × 10-1/2"R 19 copies/min.
B4, 8-1/2" × 14" 16 copies/min.
A3, 11" × 17" 14 copies/min.
* Continuous speed for same original source. Output may be
temporarily interrupted to stabilize image quality.
MX-3110N
31 copies/min.
20 copies/min.
17 copies/min.
15 copies/min.
MX-3610N
36 copies/min.
23 copies/min.
20 copies/min.
17 copies/min.
Copy ratios
Same size: 1:1 ± 0.8 % Enlarge: 115 %, 122 %, 141 %, 200 %, 400 %
Reduce: 25 %, 50 %, 70 %, 81 %, 86 %
Zoom range: 25 to 400 % (25 - 200 % using RSPF) in 1 % increments, total
376 increments. Can calculate zoom rate when mm is specied.
Paper feed / capacity
500 sheets in one tray plus 100-sheet multi-bypass tray
Using 80 g/m
2
(21 lbs.) weight paper
Max. paper feed / max. capacity
5,600 sheets in 4 trays (500 × 4) plus 100-sheet multi-bypass tray plus 3,500
sheets in large capacity tray
Using 80 g/m
2
(21 lbs.) weight paper
Continuous copy Max. 999 copies
Memory
Standard: 2 GB HDD: 160 GB SD card 4 GB PCL accelerator 1 GB
1 GB = One billion bytes when referring to hard drive capacity. Actual format
capacity is less.
Ambient
environment
Operating
environment
10 °C (54 °F) to 35 °C (91 °F) (20 % to 85 % RH) 590 - 1,013 hpa
Standard
environment
20 °C (68 °F) to 25 °C (77 °F) (65 ± 5 % RH)
Required power supply
Local voltage ± 10 % (For the power supply requirements, see the name plate
in the lower corner of the left side of the machine.)
Power consumption Max. 1.44 kW (including options such as the desk)
Dimensions
MX-2610N/MX-3110N
583 mm (W) × 658 mm (D) × 834 mm (H)
(22-61/64" (W) × 25-29/32" (D) × 32-27/32" (H))
MX-3610N
608 mm (W) × 680 mm (D) × 834 mm (H)
(24-5/16" (W) × 26-25/32" (D) × 32-27/32" (H))
Weight
MX-2610N/MX-3110N MX-3610N
Approx. 75 kg (165 lbs.) Approx. 78 kg (171 lbs.)
Overall
dimensions
With multi-bypass
tray extended
MX-2610N/MX-3110N
850 mm (W) × 658 mm (D) (33-15/32" (W) × 25-29/32" (D))
MX-3610N
876 mm (W) × 680 mm (D) (34-31/64" (W) × 26-25/32" (D))
With right side exit
tray extended
MX-2610N/MX-3110N
963 mm (W) × 658 mm (D) (37-59/64" (W) × 25-29/32" (D))
MX-3610N
1,015 mm (W) × 680 mm (D) (39-31/32" (W) × 26-25/32" (D))
SPECIFICATIONS
11
Do not look directly at the light source.
Doing so may damage your eyes.
Do not block the ventilation ports on the machine. Do not install the machine in a location that
will block the ventilation ports.
Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of re.
CAUTION
The fusing unit and paper exit area are hot. When removing a
misfeed, do not touch the fusing unit and paper exit area. Take care
not to burn yourself.
When loading paper, removing a misfeed, performing
maintenance, closing the front and side covers, and
inserting and removing trays, take care that your ngers
are not pinched.
The machine includes the document ling function, which stores document image data on the machine's hard drive. Stored documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer be
possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of important documents or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data.
Laser information
Wave length 790 nm ± 10 nm
Pulse times
Normal paper mode (P/S = 104 mm/s) = (5.15 µs ± 0.03 ns) / 7 mm
Heavy paper mode (P/S = 70 mm/s) = (3.83 µs ± 0.03 ns) / 7 mm
Output power Max 0.405 mW
Caution
Use of controls or adjustments or performance of procedures other than those
specied herein may result in hazardous radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition
2-2007)
“BATTERY DISPOSAL”
THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP
BATTERY THAT MUST BE DISPOSED OF PROPERLY.
PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORIZED
SERVICE REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS
BATTERY.