Filter
Top Products
10
Do not look directly at the light source.
Doing so may damage your eyes.
Do not block the ventilation ports on the machine. Do not install the machine in a location that
will block the ventilation ports.
Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of fi re.
CAUTION
The fusing unit and paper exit area are hot. When removing a
misfeed, do not touch the fusing unit and paper exit area. Take care
not to burn yourself.
When loading paper, removing a misfeed, performing
maintenance, closing the front and side covers, and
inserting and removing trays, take care that your fingers
are not pinched.
The machine includes the document fi ling function, which stores document image data on the machine's hard drive. Stored documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer be
possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of important documents or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data.
Laser information
Wave length 790 nm ± 10 nm
Pulse times
MX-4140N/MX-4141N
Normal paper mode (P/S = 178 mm/s) = 3.59 μs ± 0.014 μs / 7 mm
Heavy paper mode (P/S = 190 mm/s) = 3.36 μs ± 0.013 μs / 7 mm
MX-5140N/MX-5141N
Normal paper mode (P/S = 225 mm/s) = 2.84 μs ± 0.011 μs / 7 mm
Heavy paper mode (P/S = 190 mm/s) = 3.36 μs ± 0.013 μs / 7 mm
Output power Max 0.672 mW (LD1+LD2)
Caution
Use of controls or adjustments or performance of procedures other than those
specifi ed herein may result in hazardous radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 2-2007)