Sharp MX-4500N Scanner User Manual


 
94
SENDING AN IMAGE AT A SPECIFIED TIME
(Timer Transmission)
This function lets you specify a time at which a transmission or broadcast transmission will automatically take place.
Transmission begins automatically at the specified time.
When a timer transmission is stored, keep the main power switch in the "on" position. If the main power switch is in the "off"
position at the specified time, transmission will not take place.
When performing a timer transmission, you must scan the original into memory when you set up the transmission. It is not
possible to leave the document in the auto document feeder or on the document glass and have it scanned at the specified
time of transmission.
Settings selected for a timer transmission (exposure, resolution, special modes, etc.) are automatically cleared after the
transmission is finished. (However, when the document filing function is used, the scanned original and settings are stored
on the built-in hard drive. For more information on the document filing function, see the Document Filing Guide.)
This function cannot be used in USB memory mode.
1
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
2
Select the mode that you wish to use.
(1) Touch the [Mode Switch] key.
(2) Touch the key of the mode that you wish to
use.
Set a transmission to take place at 20:00 At 20:00, the transmission begins
automatically
11
Quick File
File
Special Modes
Address Entry
Address Book
Mode Switch
Send Settings
Image
Settings
Scan
Internet Fax
USB Mem. Scan
PC Scan
Data Entry
Fax
(1) (2)