Sharp MX-C300PL Printer User Manual


 
71
TROUBLESHOOTING
3
Remove the misfed paper.
Be careful not to tear the misfed paper during removal.
4
If the misfed paper cannot be removed, remove the paper by pulling it into the paper
output area.
Be careful not to tear the misfed paper during removal.
5
Lift the part with the green label that protrudes from the fusing unit paper guide, and
close the fusing unit paper guide.
6
Lift the fusing unit release levers, to return them to their operating positions.
7
Close the side cover.
The message " Clear paper path." will be cleared and printing will be
possible.
The fusing unit is hot. Do not touch the fusing unit when
removing misfed paper. Doing so may cause a burn or injury.
When removing misfed paper, do not touch or damage the transfer
belt.
Be careful about unfixed toner on the misfed paper not to soil your
hands or clothes.
When closing the side cover, press on the handle.
If the paper was torn, make sure that no torn pieces remain in the
machine.
If the message does not clear, check again to make sure that no
pieces of paper remain.
Warning
Caution
Note