Filter
Top Products
Page 11 of 16
the default level after every use.
Criteria Supporting Features Remarks and explanations
(g) Color coding shall not be used as the only means
of conveying information, indicating an action,
prompting a response, or distinguishing a visual
element.
Not Applicable
Color coding is not used without description.
(h) When a product permits a user to adjust color and
contrast settings, a range of color selections capable
of producing a variety of contrast levels shall be
provided.
Supports Color contrast levels can be adjusted.
(i) Products shall be designed to avoid causing the
screen to flicker with a frequency greater than 2 Hz
and lower than 55 Hz.
Supports
[For Touch Panel]
Applicable.
(j) Products which are freestanding, non-portable, and
intended to be used in one location and which have
operable controls shall comply with the following:
(j)-(1)The position of any operable control shall be
determined with respect to a vertical plane, which is 48
inches in length, centered on the operable control, and
at the maximum protrusion of the product within the 48
inch length (see Figure 1 of this part).
Supports
Applicable
(j)(2) Products which are freestanding, non-portable,
and intended to be used in one location and which
have operable controls shall comply with the following:
Where any operable control is 10 inches or less
behind the reference plane, the height shall be 54
inches maximum and 15 inches minimum above the
floor.
Supports
Applicable.
Operable control is 5.5 inches behind the reference
plane.
The height is 41 inches above the floor.
Platen cover also meets the requirement in (j)-2
because it can be stopped at any position.
(j)(3) Products which are freestanding, non-portable,
and intended to be used in one location and which
have operable controls shall comply with the following:
Where any operable control is more than 10 inches
and not more than 24 inches behind the reference
plane, the height shall be 46 inches maximum and 15
inches minimum above the floor.
Supports
(j)(4) Products which are freestanding, non-portable,
and intended to be used in one location and which
have operable controls shall comply with the following:
Operable controls shall not be more than 24 inches
behind the reference plane.
Supports
Return to the top of the page.