Filter
Top Products
Page 10 of 16
Criteria Supporting Features Remarks and explanations
(c) Where a product utilizes touchscreens or contact-
sensitive controls, an input method shall be provided
that complies with §1194.23 (k) (1) through (4).
k) Products which have mechanically operated
controls or keys, shall comply with the following:
Supports
The alternate method is setting machine by PC
keyboard using Web page. Web page can be read
out loud by read out software on PC. Also remote
operation function can be used to execute regular
jobs from computers.
k-(1) Controls and keys shall be tactilely discernible
without activating the controls or keys.
Supports
[For Operation Panel]
(1) Major keys are recognized not only by vision but
also by other senses.
(2) Frequent used keys are aligned to be recognized
easily and different shapes and colors are used for
the keys so as to be distinguished easier.
k-(2) Controls and keys shall be operable with one
hand and shall not require tight grasping, pinching, or
twisting of the wrist. The force required to activate
controls and keys shall be 5 lbs. (22.2 N) maximum.
Supports
[For Whole System]
(1) The force required to activate controls and keys is
22.2N or lower.
(2) Controls and keys can be operated with one hand
and do not require tight grasping, or twisting of the
wrist.
[For Input through key]
(3) Upper side of each key is concaved to be fitted on
end-users' fingertip.
k-(3) If key repeat is supported, the controls, an
input method shall be delay before repeat shall be
adjustable.
Supports
[For Input through key]
Key repeat function can be inactivated.
k-(4) The status of all locking or toggle controls or
keys shall be visually discernible, and discernable
through touch or sound.
Supports Power Key is discernible through touch.
(d) When biometric forms of user identification or
control are used, an alternative form of identification or
activation, which does not require the user to possess
particular biological characteristics, shall also be
provided.
Not Applicable No biometric forms of user identification are used.
(e) When products provide auditory output, the audio
signal shall be provided at a standard signal level
through an industry standard connector that will allow
for private listening. The product must provide the
ability to interrupt, pause, and restart the audio at
anytime.
Not Applicable No auditory output will be provided.
(f) When products deliver voice output in a public area,
incremental volume control shall be provided with
output amplification up to a level of at least 65 dB.
Where the ambient noise level of the environment is
above 45 dB, a volume gain of at least 20 dB above
the ambient level shall be user selectable. A function
shall be provided to automatically reset the volume to
Not Applicable
No voice output will be delivered in a public area.