Sharp MX-M364N All in One Printer User Manual


  Open as PDF
of 16
 
4
Do not install the machine on an unstable or slanted surface. Install the machine on
a surface that can withstand the weight of the machine.
Risk of injury due to the machine falling or toppling.
Ifperipheraldevicesaretobeinstalled,donotinstallonanunevenoor,slantedsurface,orotherwise
unstablesurface.Dangerofslippage,falling,andtoppling.Installtheproductonaat,stablesurface
that can withstand the weight of the product.
Do not install in a location with moisture or dust.
Riskofreandelectricalshock.
If dust enters the machine, dirty output and machine failure may result.
Locations that are excessively hot, cold, humid,
or dry (near heaters, humidiers, air conditioners,
etc.)
The paper will become damp and condensation may form
inside the machine, causing misfeeds and dirty output.
SPECIFICATIONS (page 10)
Ifthelocationhasanultrasonichumidier,usepurewaterfor
humidiersinthehumidier.Iftapwaterisused,mineralsand
other impurities will be emitted, causing impurities to collect
on the inside of the machine and create dirty output.
When the machine is installed, the adjusters (4) must be
lowered to the oor to secure the machine (prevent it from
moving).
Rotatetheadjustersinthelockingdirectionuntiltheyareinrmcontactwiththeoor.
If you nd it necessary to reposition the machine due to rearrangement of
your ofce layout or other reason, retract the adjusters from the oor, turn
off the power, and then move the machine.
(After moving the machine, lower the adjusters again to secure the machine.)
Locations exposed to direct sunlight
Plastic parts may become deformed and dirty output may result.
Locations with ammonia gas
Installing the machine next to a diazo copy machine may cause dirty output.
Lock
Release
Do not install the machine in a location with poor air
circulation.
A small amount of ozone is created inside the machine during
printing.Theamountofozonecreatedisnotsufcienttobe
harmful; however, an unpleasant odor may be noticed during large
copy runs, and thus the machine should be installed in a room with
aventilationfanorwindowsthatprovidesufcientaircirculation.
(The odor may occasionally cause headaches.)
* Install the machine so that people are not directly exposed to
exhaust from the machine. If installed near a window, ensure
that the machine is not exposed to direct sunlight.
Near a wall
Be sure to allow the required space around the machine for
servicing and proper ventilation. (The machine should be no closer
than the distances indicated below from walls. The indicated
distancesareforthecasewhenasaddlenisherandlargecapacity
paper tray are not installed.)
30 cm
30 cm
45 cm
Locations subject to vibration.
Vibration may cause failure.
CAUTION
The machine includes a built-in hard drive. Do not subject the machine to shock or
vibration. In particular, never move the machine while the power is on.
• The machine should be installed near an accessible power outlet for easy connection.
• Connect the machine to a power outlet which is not used for other electric appliances. If a lighting
xture is connected to the same outlet, the light may icker.
Do not throw a toner cartridge into a re.
Tonermayyandcauseburns.
Store a toner cartridge out of the reach of children.
About consumables
CAUTION
Installation notes
CAUTION
 previous next