Sharp MX-M753N All in One Printer User Manual


 
7-52
SYSTEM SETTINGS
Contents
* If the user name cannot be acquired, the first 16 characters
of the text string entered as the user name for network
authentication is used.
If the login name is different but the user name received
from the LDAP server is the same, or if the user name is
already registered on the machine, "Can not login
because the user name entered has been previously
registered" will appear and login will not be possible. In
this case, the user name stored on the LDAP server or
the user name stored on the machine must be changed.
Consult the administrator of the machine.
If automatic registration by LDAP authentication is
attempted when 1000 users are already stored, the
following message will appear and login will not be
possible: "Maximum entries for User Name is 1000.
Please delete old or unused user name." Consult the
administrator of the machine.
Display Usage Status after Login
When user authentication is enabled, this setting
specifies whether or not the page counts of a user
appear when the user logs in.
User Information Print
The following lists can be printed.
•User List
• List of Number of Pages Used
• Page Limit Group List*
• Authority Group List
• Favourite Operation Group List*
• All User Information Print
Touch the key of the desired list to begin printing.
* Cannot be printed when no groups are stored.
E-mail Address Information is acquired from the
LDAP server.
My Folder
Pages Limit
Group
Authority Group
Favourite
Operation
Group
If access control information cannot be obtained
from the LDAP server used for authentication, user
authentication cannot take place.
If a user that is registered in the machine is
authenticated by network authentication, the user
registration settings in the machine will be given
priority for the page count limit group, authority
group, favourite operations group, and my folder.
If the access control obtained from the LDAP server
is not registered in the machine, the factory default
user authority will be applied.
When this function is not enabled and a user is
authenticated by network authentication as a
non-registered user, the factory default user
authority will be applied.
Item Description