Filter
Top Products
43
Useful
Features
Adjusting the Projected Image
(“SCR - ADJ” Menu)
SEL./ADJ. ENTER END
Resize
Image Shift 0
0
Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Front
English
On
Logo
On
Auto Keystone On
Border
Picture SCR - ADJ PRJ - ADJ Help
8
7
6
5
4
3
2
1
11
11
1 Setting the Resize Mode
• For details of the Resize mode, see pages
30 and 31.
•You can also press RESIZE on the remote con-
trol to set the resize mode. (See page 30.)
Note
22
22
2 Adjusting the Image
Position
You can move the projected image vertically.
Q button
• This function only works in some RESIZE
modes. (See pages 30 and 31.)
Note
O button
Menu operation n Page 38
33
33
3 Keystone Correction
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted
trapezoidally. The function for correcting trap-
ezoidal distortion is called Keystone Correction.
For Auto Keystone Correction
Set “Auto Keystone” on the “SCR - ADJ”
menu to “On”.
For Manual Keystone Correction
Set “Auto Keystone” on the “SCR - ADJ”
menu to “Off”, select “Keystone”, and
then adjust with the slide bar.
• The Keystone Correction can be adjusted up
to an angle of approximately ±40 degrees
(when “Resize” is set to “Normal”).
•You can also press KEYSTONE on the remote
control or on the projector to adjust Keystone
Correction.
Note
Manual Correction
See page 28 for details of Keystone Correction.
O buttonQ button