Filter
Top Products
25
Connections
Connecting the Power Cord
Plug the supplied power cord into the
AC socket on the rear of the projector.
Then plug into AC outlet.
When connecting to the LAN terminal using a LAN cable
TX/RX LED (yellow)
Illuminates when transmitting/receiving data.
LINK LED (green)
Illuminates when linked.
*To ensure safety, do not connect the LAN terminal with
any cables that may cause excessive voltage such as a
telephone line.
Hub
or
Computer
LAN cable (Category 5 type,
commercially available)
To LAN terminal
Note
• When connecting to a hub, use a straight-through Category 5 (CAT.5) type cable (commercially
available).
• When connecting to a computer, use a cross-over Category 5 (CAT.5) type cable (commercially
available).
AC socket
To AC outlet
Power cord
(supplied)