Filter
Top Products
62
Specifi cations
Model PG-D40W3D
Display devices 0.65" DLP
®
Chip
Resolution WXGA (1280 × 800)
Lens F number F 2.5 – 2.7
Zoom Manual, ×1.15 (f = 21.0 – 24.2 mm)
Focus Manual
Input terminals HDMI ×1
Computer/Component1/2
(mini D-sub 15 pin)
×2
S-Video (mini DIN 4 pin) ×1
Video (RCA) ×1
Audio (ø3.5 mm stereo minijack) ×1
Audio (RCA) ×1 (L/R)
Output
terminals
Computer/Component
(mini D-sub 15 pin)
×1
Audio (ø3.5 mm stereo minijack) ×1 (variable audio output)
Control and
communication
terminals
LAN (RJ-45) ×1
USB (Type B) ×1
RS-232C (mini D-sub 9 pin) ×1
Speakers 5W × 2 (Stereo)
Projection lamp 330 W
Rated voltage AC 100 – 240 V
Rated frequency 50/60 Hz
Input current 4.5 A
Power consumption (Standby*) 429 W (10.6 W) with AC 100 V
408 W (11.2 W) with AC 240 V
Operation temperature 41ºF to 95ºF (+5ºC to +35ºC)
Cabinet Plastic
Dimensions (main body only) [W × H × D] 15
3
/
4
" × 3
15
/
16
" × 13
13
/
64
"
(400 × 100 × 335 mm)
Weight (approx.) 12.8 lbs. (5.8 kg)
*STANDBY Mode: Standard
As a part of policy of continuous improvement, SHARP reserves the right to make design and
specifi cation changes for product improvement without prior notice. The performance specifi cation
fi gures indicated are nominal values of production units. There may be some deviations from these
values in individual units.
This SHARP projector uses a DLP
®
chip. This very sophisticated panel contains 1,024,000
pixels (micromirrors). As with any high technology electronic equipment such as large screen
TVs, video systems and video cameras, there are certain acceptable tolerances that the
equipment must conform to.
This unit has some inactive pixels within acceptable tolerances which may result in inactive dots
on the picture screen. This will not affect the picture quality or the life expectancy of the unit.