Sharp PG-LW3500 Projector User Manual


 
66
Compatibility Chart
Computer
Multiple signal support
Horizontal Frequency: 15-110 kHz,
Vertical Frequency: 45-85 Hz,
Pixel Clock: 12-165 MHz
Sync signal: Compatible with TTL level
Compatible with sync on green signal
PC/MAC Mode Resolution
Horizontal frequency
[kHz]
Vertical frequency [Hz]
Analog
Support
Digital
Support
Display
PG-LW3000/PG-LW3500
PG-LX3500/PG-LX3000
PC
VGA 640 × 480
31.5 60
4 4
Upscale
Upscale
37.9 72
4 4
37.5 75
4 4
43.3 85
4
SVGA 800 × 600
35.2 56
4 4
37.9 60
4 4
48.1 72
4 4
46.9 75
4 4
53.7 85
4
XGA 1024 × 768
48.4 60
4 4
TRUE
56.5 70
4 4
60.0 75
4 4
68.7 85
4
WXGA
1280 × 720 45.0 60
4 4
TRUE
Intelligent
Compression
1280 × 768 47.8 60
4 4
1280 × 800
49.7 60
4 4
62.8 75
4
1360 × 768 47.7 60
4 4
Intelligent
Compression
1366 × 768 47.8 60
4 4
WXGA+ 1440 × 900 55.9 60
4
SXGA
1152 × 864
55.0 60
4
66.2 70
4
67.5 75
4
1280 × 960
60.0 60
4 4
75.0 75
4
1280 × 1024
64.0 60
4 4
80.0 75
4 4
SXGA+ 1400 × 1050
64.0 60
4 4
65.3 60
4 4
WSXGA+ 1680 × 1050 65.3 60
4
UXGA 1600 × 1200 75.0 60
4
MAC 13” VGA 640 × 480 34.9 67
4
Upscale
Upscale
MAC 16” SVGA 832 × 624 49.7 75
4
MAC 19” XGA 1024 × 768 60.2 75
4
TRUE
MAC 21” SXGA 1152 × 870 68.7 75
4
Intelligent
Compression
Intelligent
Compression
• Optimum image quality will be achieved by matching your computer's output resolution to the
resolution that corresponds to “TRUE” in the “Display” column shown above.
• When “Screen resolution” of the computer is different from the resolution displayed on the projected
image, follow the procedures shown below.
– Refer to “Resolution” on the “SIG-ADJ” menu and select the same resolution as the resolution in
“Screen resolution” of the computer.
Depending on the computer you are using, the output signal may not be faithful to the “Screen resolution”
adjustment. Check the settings of the computer's signal output. If the settings cannot be changed, it is
recommended that the resolution be set to the one that corresponds to “TRUE” in the “Display” column.
Note