Filter
Top Products
TROUBLESHOOTING AND MAINTENANCE
75
8
Paper misfeed.
Misfeed occur.
→
→ →
→ To remove the misfeed, see "MISFEED
REMOVAL".
80
The paper is outside of the specified
size and weight range.
→
→ →
→ Use copy paper within the specified
range.
18
Paper curled or damp.
→
→ →
→ Do not use curled or crimped paper.
Replace with dry copy paper. During
periods when the machine is not used
for a long time, remove the paper from
the tray and store it in a dark place in a
bag to prevent moisture absorption.
-
Paper is not loaded properly.
→
→ →
→ Make sure that the paper is properly
loaded.
19
Pieces of paper inside machine.
→
→ →
→ Remove all pieces of misfed paper.
81
Too much paper is loaded in the tray.
→
→ →
→ If the stack of paper is higher than the
indicator line on the tray, remove some
of the paper and reload so that the
stack does not exceed the line.
19
Some sheets of paper stick together.
→
→ →
→ Fan the paper well before loading it.
20
The guides on the bypass tray do not
match the width of the paper.
→
→ →
→ Adjust the guides to match the width of
the paper.
22
The bypass tray extension is not
opened.
→
→ →
→ When loading a large size of paper,
open the extension.
22
White or black lines
appear on copies.
The scanner glass for the RSPF is dirty.
→
→ →
→ Clean the long, narrow scanning
window.
89
The TD cartridge or drum cartridge is
dirty.
→
→ →
→ Clean the TD cartridge or drum
cartridge.
90
The transfer charger is dirty.
→
→ →
→ Clean the transfer charger.
91
Problem Cause and solution Page
AL-1655CS.book 75 ページ ２００４年８月２２日 日曜日 午後６時４４分