Filter
Top Products
7
GETTING STARTED
PART NAMES AND FUNCTIONS
Part names and functions
GETTING STARTED
@0 SORT/GROUP ( / ) key and indicators
(p. 25)
Press to select the sort or group mode.
@1 ORIGINAL DATA ( ) indicator
Blinks when the memory becomes full of scanned
original image data.
@2 Light ( ) and dark ( ) keys and indicators
(p. 17)
Use to adjust the MANUAL ( ) or PHOTO ( )
exposure level.
@3 AUTO IMAGE ( ) key and indicator (p. 20)
Press for automatic copy ratio selection.
@4 TRAY SELECT ( ) key (p. 16)
Use to manually select a paper tray.
@5 PRESET RATIO selector keys and indicators
(p. 21)
Use to sequentially select preset reduction/enlargement
copy ratios: 50%, 64%, 77%, 95%, 100%, 121%, 129%,
141%, 200%.
@6 ZOOM indicator (p. 21)
Lights up when a zoom ratio is set.
@7 Zoom keys (p. 21)
Use to select any reduction or enlargement copy ratio
from 50% to 200% in 1% increments.
@8 Copy ratio display ( ) key (p. 21)
Press and hold down during standby to display the copy
ratio in the copy quantity display.
@9 Copy quantity keys
Use to select the desired copy quantity or to make user
program entries.
#0 CLEAR ( ) key
Clears the copy quantity display or terminates a copy
run.
Press during standby to display the total number of
copies made to date.
Press and hold down the key. 12,345 sheets output
1st display
2nd display
Note: 11" x 17" size copies are counted as two
copies.
#1 START ( ) key and indicator
Copying is possible when the indicator is on.
Press to start copying.
Initial settings
The copier assumes the initial settings when it is first turned
on, when the CLEAR ALL ( ) key is pressed, or ap-
proximately one minute* after the last copy is made in any
mode.
●
Copy ratio: 100%
●
Exposure: Automatic
●
All special copier modes: Off
●
Auto paper selection: On
●
Copy quantity: 0
●
Paper feed station: Previously selected paper tray
* This time (auto clear time) can be changed. See page 49,
USER PROGRAMS.
o !0 t !1 !2 !3
#1#0@8 @9@7@6