Filter
Top Products
Sending a Fax by Automatic Dialing
52
Dialing an auto-dial number with the SPEED key
1
If you are sending a fax, load the
document(s).
• If desired, press to set the
resolution and/or contrast.
2
Press and then enter the 2-digit Speed Dial number (for example,
press ).
3
Check the display. If the name or number shown is correct, press
. (If not, press and repeat Step 2.)
• If the transmission is completed successfully, the fax will beep once.
• If an error occurs, the fax will beep three times and print a Transaction
Report to inform you of the problem (see page 77).
Using a Speed Dial number for a voice call
To use a Speed Dial number for a voice call, lift the handset, press ,
and enter the Speed Dial number.
RESOLUTION/
RECEPTION MODE
SPEED
0 1
START/MEMORY
STOP
SPEED
READY TO SEND